Description Product Overview RLA Polymers TruLevel Rapid Patch Repair Mortar is a high-strength, cement-based repair compound engineered for rapid patching, levelling, and reinstatement of internal concrete substrates. It is designed to deliver a smooth, durable finish while achieving rapid strength development, allowing subsequent flooring installation within tight timeframes. The product is formulated as a slump-free mortar, making it suitable for both horizontal and vertical applications such as ramps, steps, and edge repairs. It provides excellent adhesion to prepared substrates and maintains dimensional stability during curing, reducing the risk of shrinkage or cracking. RLA Polymers TruLevel Rapid Patch Repair Mortar is commonly used in commercial and residential flooring preparation where fast turnaround is required. Key Features Rapid-setting repair mortar for fast-track installations Slump-free formulation for vertical and horizontal applications Accepts foot traffic in approximately 1–2 hours Ready for floor coverings after approx. 2 hours Application thickness from 2 mm to 40 mm in one layer High compressive strength and mechanical performance Dimensionally stable with low shrinkage Eliminates need for traditional sand/cement screeds Applications Repairing and patching internal concrete subfloors Forming ramps and falls Levelling steps, landings, and edges of slabs Filling holes and surface defects in concrete Substrate preparation prior to vinyl, carpet, and tile installation Fast reinstatement in commercial and residential flooring projects Notes Mix 20 kg bag with approx. 4.8 – 5.0 litres of clean water Use mechanical mixing for consistent results Working time approx. 15–25 minutes depending on temperature Apply immediately after mixing – do not retemper Apply between 2 mm and 40 mm per layer Prime substrate prior to application as required Do not apply over contaminated or weak substrates Protect from rapid drying conditions during curing Technical Information Technical Specifications: Type Cement-based rapid repair mortar Form Powder Colour Grey Mix Ratio 4.8 – 5.0 L water per 20 kg Application Thickness 2 – 40 mm per application Working Time Approx. 15 – 25 minutes Initial Set Approx. 25 – 30 minutes Final Set Approx. 40 – 45 minutes Foot Traffic Approx. 45 – 120 minutes Ready for Coverings Approx. 2 hours Compressive Strength Approx. 45 MPa at 28 days Application Temperature 5°C to 30°C Yield Approx. 13 litres per 20 kg bag Packaging 20 kg bags This repair mortar is designed for trade professionals requiring rapid turnaround, high strength, and reliable performance in floor preparation. Its fast setting and ability to accept floor coverings within hours make it ideal for time-critical projects.
