Description Product Overview ARDEX K 60 Arditex is a two-component levelling and smoothing system consisting of a cementitious powder and liquid latex additive. It is designed to provide exceptional adhesion, flexibility, and moisture resistance, making it suitable for a wide range of internal subfloor applications. The system does not require water for mixing, instead using the supplied latex liquid to create a highly flexible, stress-free compound that resists cracking and performs well over challenging substrates. ARDEX K 60 Arditex is particularly suited to timber floors and moisture-sensitive environments, as well as installations over existing surfaces such as tiles, terrazzo, and adhesive residues. Key Features Two-part system (powder latex liquid) – no water required High flexibility for use over timber and movement-prone substrates Excellent adhesion to a wide range of surfaces Moisture resistant and suitable for damp substrates No priming required in most applications Self-smoothing with high flow for consistent finish Rapid setting – walkable in approx. 2–3 hours Suitable for use over difficult substrates including tiles and steel Applications Levelling concrete and cement-based subfloors Application over timber and plywood substrates Use over ceramic tiles, terrazzo, and quarry tiles Installation over existing epoxy coatings and adhesive residues Subfloor preparation prior to vinyl, carpet, and timber flooring Applications in moisture-prone or damp environments Notes Mix cement powder with supplied latex liquid only (no water) Working time approximately 20 minutes (site dependent) Apply using trowel, gauge rake, or smoothing tool Apply from feather edge up to specified thickness No priming required in most cases (check substrate conditions) Walkable in approximately 2–3 hours Install floor coverings once compound has dried sufficiently Technical Information Technical Specifications: Type Two-part latex levelling compound (cement powder latex liquid) Mixing No water required – mix powder with latex liquid Working Time Approx. 20 minutes Walk-On Time Approx. 2–3 hours Application Thickness Feather edge to 12mm (bulk fill 10–30mm with aggregate) Coverage Approx. 13 m² at 1mm thickness Consumption Approx. 1.6 kg/m² per mm Substrates Concrete, timber, tiles, terrazzo, steel, epoxy coatings Location Internal use Properties Flexible, moisture resistant, high adhesion Packaging 20kg powder approx. 4.8–5L latex liquid Shelf Life Approx. 9–12 months (unopened) This levelling system is designed for challenging subfloor conditions where flexibility and adhesion are critical. Its latex-based formulation allows installation over a wide range of substrates without compromising performance, making it suitable for both refurbishment and new construction projects.
