Description Product Overview Adesilex G19 is a two-component epoxy-polyurethane adhesive formulated for the installation of resilient and textile floor coverings across a wide range of substrates. When mixed, the components form a smooth, workable paste that cures through a chemical reaction to deliver a tough, elastic bond with no shrinkage. The adhesive is specifically designed for use on non-absorbent or moisture-sensitive substrates such as metal, timber, ceramic, and existing flooring systems. It provides high resistance to moisture, temperature variation, and mechanical stress, making it suitable for areas exposed to heavy traffic, forklift use, or frequent cleaning. Key Features Two-component epoxy-polyurethane adhesive system Extremely strong, tough, and elastic bond performance No shrinkage during curing Excellent resistance to moisture, heat, and ageing Suitable for non-absorbent and moisture-sensitive substrates Handles heavy traffic and mechanical stress conditions Long open time for controlled installation Internal and external application capability Applications Bonding rubber flooring and athletic track systems Installation of PVC, LVT, and vinyl sheet flooring Fixing textile floor coverings and carpets Bonding semi-flexible vinyl and quartz tiles Installing flooring over existing surfaces Areas subject to heavy traffic, forklifts, or temperature extremes Notes Mix components in pre-measured ratio (Component A : B = 94 : 6) Blend using mechanical mixer until uniform paste is achieved Apply with appropriate notched trowel based on flooring type Open time approx. 60 minutes at 23°C Ensure full transfer of adhesive to backing during installation Roll or weight flooring to ensure proper adhesion Light foot traffic after approx. 12–24 hours Full cure achieved after approx. 72 hours Technical Information Technical Specifications: Type Two-component epoxy-polyurethane adhesive Mix Ratio Component A : B = 94 : 6 (by weight) Consistency Thick paste (A) fluid paste (B) Pot Life Approx. 50–60 minutes Open Time Approx. 60 minutes Initial Set Approx. 9–10 hours Light Foot Traffic Approx. 12–24 hours Full Cure Approx. 72 hours Application Temperature 10°C to 30°C Coverage Approx. 350–1000 g/m² (trowel dependent) Service Temperature -40°C to 100°C Substrates Concrete, metal, timber, ceramic, PVC, rubber, stone Packaging 2kg, 5kg, 10kg kits Shelf Life Approx. 12–24 months (sealed) This adhesive is designed for demanding flooring applications where high bond strength, flexibility, and resistance to environmental stress are required. It is particularly suited to commercial and industrial installations involving resilient floor coverings.
