Description Product Overview STYCCOBOND F49 is a two-part, water-based pressure sensitive adhesive developed for the installation of vinyl floorcoverings in environments subject to extreme temperature variation. Once mixed, it provides high initial tack and strong bond strength, ensuring secure installation across a wide range of conditions. Designed for challenging environments such as conservatories, areas with direct sunlight, and wet rooms, the adhesive remains stable in temperatures ranging from -20°C to 60°C. It also offers excellent resistance to plasticiser migration and bio-degradation, supporting long-term performance. STYCCOBOND F49 features an extended open time and pot life, allowing installers flexibility when working across large areas or complex layouts. Key Features Two-part system delivers high bond strength and durability Strong initial tack for improved placement control Temperature tolerant from -20°C to 60°C Water resistant, suitable for wet room environments Excellent resistance to plasticiser migration Long open time and extended pot life for flexibility Low hazard formulation suitable for sensitive areas Approved for marine applications Suitable for use over underfloor heating systems Applications Vinyl sheet and tile floorcoverings Installation in areas with high temperature fluctuation Wet rooms and high-moisture environments PVC skirting, coving, and capping PVC-backed textile floorcoverings Commercial and residential flooring installations Notes Mix base and activator thoroughly before application Apply using a fine notch (A1) trowel Allow adhesive to develop tack where required before laying Open time up to 4 hours depending on conditions Pot life up to approximately 3 hours at 20°C Drying time from approx. 20–40 minutes depending on site conditions Ensure subfloor is smooth, dry, and structurally sound Technical Information Technical Specifications: Type Two-part, water-based pressure sensitive adhesive Colour Base: white / Activator: red / Mixed: light pink Open Time Up to 4 hours (site dependent) Pot Life Up to 3 hours at 20°C Drying Time From approx. 20–40 minutes Coverage Up to 6 m² per kg (A1 trowel) Trowel STYCCOBOND Fine Notch (A1) Temperature Resistance -20°C to 60°C Water Resistance Suitable for wet areas Compatibility Vinyl, PVC-backed textiles, skirting, coving Underfloor Heating Suitable Standards IMO Marine Approved, EC1 Low Emission Pack Sizes 2kg, 5kg kits This adhesive is designed for installations where environmental conditions would typically compromise standard adhesives. Its combination of temperature tolerance, water resistance, and extended working time makes it suitable for high-performance flooring applications across a wide range of environments.
