XTREME Flat Finish Klearkote 4.4 VOC

$ 85.50

Categories: , Cocina

Description Items Included 5165 | Original Flat Finish Klearkote – 4.4 VOC (1 Gallon/3.785 Liters) 5187 | Original Hardener Medium – 4.4 VOC(1 Quart/.946 Liters) 5 STAR Xtreme’s #5165 Original Flat Finish Klearkote is a matte finish clearcoat designed to offer that very popular Old School, no gloss look when used over any color basecoat paint, while offering the UV protection and durability of a standard clearcoat finish. TECH DATA: Mixing Ratio: 6 parts #5165: 1 part #5187 Viscosity (RTS): 17-19 seconds #2 Zahn Volume Solids (RTS): 28% Film Build: 0.8 – 1.0 mils per full wet coat Coverage: 449 sq. ft. per gallon @ 1 dry mil Disposal/Safety: see MSDS for this product Humidity Resistance: Excellent Salt Spray Resistance Excellent Pot Life: 4-5 hours 5 STAR AUTOBODY PRODUCTS TECHNICAL DATA INFORMATION DATED: JULY 2015 PRODUCT NUMBER – DESCRIPTION #5165 – ORIGINAL FLAT FINISH KLEARKOTE 4.4 VOC PRODUCT DESCRIPTION: 5 STAR XTREME #5165 “FLAT FINISH” KLEAR is a matte finish clearcoat designed to offer that very popular Old School, no gloss look when used over any color basecoat paint, while offering the UV protection and durability of a standard clearcoat finish. PRODUCTS: • 5165-1 Original Flat Finish 4.4 VOC Klearkote, Gallon • 5165-4 Original Flat Finish 4.4 VOC Klearkote, Quart • 5187-4 Original 4.4 VOC Medium Activator, Quart • 5187-16 Original 4.4 VOC Medium Activator, Half Pint BASECOAT: Compatible with most paint manufacturers’ solvent and waterborne systems. Apply basecoat as per manufacturer’s mixing and application instructions. Allow sufficient flash times before applying #5165. Inadequate flash time will affect the performance of the clear. MIXING RATIO (6:1): IMPORTANT: STIR & SHAKE WELL BEFORE POURING Mix 6 parts #5165 FLAT FINISH Klearkote to 1 part #5187 Activator. APPLICATION: Apply 2-3 even medium wet coats with 75% overlap at 40-50 psi or (6-10 psi when using HVLP at the gun), allowing a 10-15 minute flash between coats. NOTE: SPRAY A TEST PANEL BEFORE CLEARCOATING YOUR PROJECT DRY TIMES AT 77°F: Flash Time 10-15 mins DUST FREE 15-20 Minutes TACK FREE 45 Minutes TO DELIVER 16-24 Hours (air dry) FORCE DRYING: BAKE TIME @ 140° F 30 Minutes RECOATING: #5165 may be recoated after a 24 Hour dry at 77° F, or upon cool down after force drying at 140° F for 30 minutes. POT LIFE: Pot life will be about 4-5 hours at 77°F. CLEAN UP: Clean equipment immediately using 5 STAR #5700 Premium Lacquer Thinner or #5685 Urethane Reducer. TECH DATA: Mixing Ratio: 6 parts #5165: 1 part #5187 Viscosity (RTS): 17-19 seconds #2 Zahn Volume Solids (RTS): 28% Film Build: 0.8 – 1.0 mils per full wet coat Coverage: 449 sq. ft. per gallon @ 1 dry mil Disposal/Safety: see MSDS for this product. Humidity Resistance: Excellent. Salt Spray Resistance: Excellent FIRST AID: In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention. For skin: Wash thoroughly with water. If difficulty in breathing is experienced, get medical attention immediately. If swallowed, do not induce vomiting, get medical attention immediately. See Material Safety Data Sheet. SAFETY INFORMATION – FOR INDUSTRY USE ONLY Danger: Vapor harmful. May affect the brain or nervous system causing dizziness, headache, or nausea. May cause eye, skin, nose, and throat irritation. Harmful if swallowed. Precautions: Vapors may ignite explosively. Keep away from heat, sparks, and flame. Vapors may cause flash fire. Do not smoke. Extinguish all flames and pilot lights, and turn of stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent buildup of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe vapor or spray mist. Do not get in eyes, on skin or clothing. Wash thoroughly after handling. Wear solvent resistant gloves. The material id designed for application only by professionally trained personnel using proper equipment under controlled conditions, and is not intended for sale to the general public. KEEP OUT OF REACH OF CHILDREN.

XTREME Flat Finish Klearkote 4.4 VOC

XTREME Flat Finish Klearkote 4.4 VOC

Related products