Description Product Overview Mapei Ultrabond Eco Fast Track is a high-performance adhesive formulated in water dispersion, designed specifically for fast-track renovation projects where speed and reliability are critical. It features very fast initial grab and rapid strength development, allowing floor coverings to be installed, trafficked, and even welded in significantly shorter timeframes compared to traditional adhesives. The adhesive forms a strong, stable bond with excellent dimensional stability, helping to prevent movement, shrinkage, and open joints in installed floor coverings. Ultrabond Eco Fast Track is suitable for a wide range of resilient floor coverings and is particularly effective for detailed work such as covings, skirtings, steps, and profiles. Key Features Very fast initial grab for rapid installation Short waiting and open times for quick turnaround Allows early welding of joints (approx. 3 hours) High final bond strength Excellent dimensional stability – reduces open joints Solvent-free, low VOC (EC1 rated) Suitable for fast renovation and refurbishment projects Applications Bonding homogeneous and heterogeneous PVC flooring Installation of LVT, vinyl, rubber, and textile floor coverings Fixing skirtings, covings, steps, and profiles Fast-track commercial and residential renovations Internal flooring and wall applications Notes Apply to clean, dry, and properly prepared substrates Stir adhesive before use Apply using a suitable notched trowel (A1, A2, B1, B2) Allow 5–10 minutes waiting time before laying Open time approximately 15 minutes Press or roll flooring immediately after placement Set to light foot traffic after approximately 1 hour Allow approx. 3 hours before welding seams Technical Information Apply to clean, dry, and properly prepared substrates Stir adhesive before use Apply using a suitable notched trowel (A1, A2, B1, B2) Allow 5–10 minutes waiting time before laying Open time approximately 15 minutes Press or roll flooring immediately after placement Set to light foot traffic after approximately 1 hour Allow approx. 3 hours before welding seams
