2011-2016 Chevy/GMC 6.6L Duramax LML Remanufactured CP4 Injection Pump — Bosch 0986437421

$ 98.48

Categories: , Tile Trims

Remanufactured CP4.2 High-Pressure Fuel Injection Pump — 2011–2016 Chevy/GMC 6.6L Duramax LML & LGHDirect replacement CP4.2 high-pressure fuel injection pump for 2011–2016 Chevrolet Silverado and GMC Sierra 2500HD/3500HD with the 6.6L Duramax LML engine, as well as LGH-equipped Express/Savana vans and medium-duty trucks. Remanufactured to OEM specifications using original equipment or OE-validated components, assembled and tested on state-of-the-art Bosch-calibrated equipment.Why the CP4 FailsThe Bosch CP4.2 replaced the proven CP3 starting in 2011. It creates higher fuel pressure with less volume — more efficient, but far less tolerant of fuel quality issues. The CP4’s ultra-tight internal tolerances make it vulnerable to cavitation, water contamination, and the reduced lubricity of modern ultra-low sulfur diesel (ULSD). When a CP4 fails, it doesn’t just stop working — it grenades, sending metal shavings through the entire high-pressure fuel system: rails, lines, and all 8 injectors.A CP4 failure typically costs $8,000–$12,000 when the entire fuel system needs replacement. Catching low rail pressure early and replacing just the pump before catastrophic failure saves thousands. Read our complete guide: Duramax CP4 Failure: Symptoms, Causes & What to DoWhat’s Different About This PumpThis is not a used or “rebuilt” pump with just new seals. Every unit is fully remanufactured with OEM or OE-validated components, then tested through 10 quality checks including fuel delivery from cranking to full-load RPM, leak testing, and torque curve verification. The pump ships ready to install with no additional parts or modifications needed.SpecificationsTypeBosch CP4.2 high-pressure common rail injection pumpConditionRemanufactured to OEM specificationsFitment2011–2016 GM 6.6L Duramax LML (pickup) & LGH (van/medium-duty)OEM Part Number12638262Alliant Power Part NumberFIE20281Warranty24-month, unlimited mileageCore RequiredYes — core charge applies, refunded on return of rebuildable coreCountry of OriginUSAFitment2011–2016 Chevrolet Silverado 2500HD / 3500HD (6.6L Duramax LML)2011–2016 GMC Sierra 2500HD / 3500HD (6.6L Duramax LML)2011–2016 Chevrolet Express / GMC Savana (6.6L Duramax LGH)Medium-duty GM/International trucks with 6.6L Duramax LGHCross-Reference Part NumbersThis pump replaces the following OEM and aftermarket part numbers:Bosch0 445 010 616, 0 445 010 687, 0 445 010 802, 0 445 010 817, 0 986 437 421GM/OEM12638262, 12639151, 12645102, 12645103, 12658095, 12661059, 98077841OtherIP36, IP52, DA225105, 7EX836104, 739-109, 30-3004, 19432134Signs Your CP4 Is FailingDon’t wait for catastrophic failure. If you’re seeing any of these symptoms, your CP4 may be on its way out:Low rail pressure codes — P0087 (fuel rail pressure too low), P0088, P228DHard starting or extended crankLoss of power under load — especially noticeable when towingEngine stumbling or surging at highway speedsActual vs. desired rail pressure deviation — if you’re monitoring with a scan tool or Banks iDash, watch for the gap wideningMetal shavings in the fuel filter — if you see glitter in the filter, the pump has already started to self-destruct⚠️ Critical: If you find metal in your fuel filter, do NOT just replace the pump. The contamination has likely spread to the injectors, rails, and fuel lines. At that point, the entire high-pressure fuel system needs replacement to prevent repeat failure. Contact us for a complete fuel system assessment.Installation NotesThis pump is a direct drop-in replacement — no modifications, tuning, or additional hardware requiredAlways replace the fuel filter before installing a new pumpInspect the fuel filter housing for metal contamination before installation — if metal is present, the entire fuel system needs attentionConsider adding a fuel additive like Stanadyne Performance Formula to improve fuel lubricity and extend CP4 lifeA quality lift pump with fine filtration (2–10 micron) can significantly reduce the risk of future CP4 failure by delivering cleaner fuel at consistent pressureCP4 Replacement vs. CP3 ConversionSome owners choose to convert from the factory CP4 to a CP3 injection pump for maximum reliability. A CP3 conversion eliminates the catastrophic failure risk entirely but costs $3,500–$7,000 and requires additional components, tuning, and labor. Replacing the CP4 with a quality remanufactured unit is the more affordable and straightforward option — especially if the rest of the fuel system is clean. Read our complete comparison: Duramax CP4 to CP3 Conversion: Is It Worth It?Why Buy From Valley Fuel Injection?We’re not an online parts catalog — we’re a Bosch-certified diesel fuel injection service center and authorized Alliant Power dealer with over 45 years of hands-on diesel injection experience. We test and rebuild injection pumps on Bosch-calibrated equipment every day. When you buy a CP4 from us, you’re buying from a shop that understands the entire fuel system — not a warehouse that ships boxes.Need help diagnosing a CP4 issue or determining if your fuel system needs a full replacement? Call us at (530) 668-0818.

2011-2016 Chevy/GMC 6.6L Duramax LML Remanufactured CP4 Injection Pump — Bosch 0986437421

2011-2016 Chevy/GMC 6.6L Duramax LML Remanufactured CP4 Injection Pump — Bosch 0986437421

Related products